| Hardware |
| Processor Type |
32-bit NS9215 processor |
| ARM Core |
ARM926EJ-S |
| Cache |
4k I-Cache / 4k D-Cache |
| Processor Speed |
150 MHz |
| Memory Base Population |
Up to 16 MB NOR flash
Up to 32 MB SDRAM |
| Additional Population Options |
RJ-45 Ethernet connector
2 / 4 / 8 / 16 MB NOR flash
8 / 16 / 32 MB SDRAM |
| Flexible Interface Modules (FIMs) |
2x 300 MHz DRPIC165X CPUs with 2k program/192 bytes data RAM |
| On-chip 256-bit AES Accelerator |
• |
| Power Management Modes |
On-the-fly clock scaling; Low-power sleep modes; Configurable scaling/wake-up events (RTC, ADC, EIRQ, UART, etc.) |
| Pins/Form Factor |
Small-footprint module with 2x 80-pin board-to-board connectors |
| UART |
Up to 4 high-speed UARTs; Maximum data rate 1.8432 Mbps |
| GPIO |
Up to 64 GPIOs; 2 external IRQs |
| SPI |
Master data rate 33.3 Mbps; Slave data rate 7.5 Mbps |
| I2C |
v1.0 bus interface; 7-bit and 10-bit address modes |
| External Memory Bus |
17-bit address and 16-bit data bus with 2 external chip select |
| ADC |
12-bit/8-channel; External reference |
| Timers/PWM |
Up to ten 16-/32-bit timers/counters
Modes: internal timer with external terminal count option, external gated timer, event counter
Up to 5 PWM functions |
| LEDs |
2 (general purpose) |
| POR controller |
• |
| Watchdog Timer (16-bit) |
• |
| Real-Time Clock |
With 64 bytes of NVRAM and external battery backup |
| JTAG interface |
• |
| Quadrature Decoder/Counter |
• |
| 5V Tolerant General Purpose and Memory Inputs |
• |
| Dimensions (L x W x H) |
50 mm x 50 mm x 6.1 mm (1.97 in x 1.97 in 0.24 in); population option without RJ-45 |
| Network Interface - Wired |
| Standard |
IEEE 802.3 |
| Physical Layer |
10/100 Base-T |
| Data Rate |
10/100 Mbps (auto-sensing) |
| Mode |
Full or half duplex (auto-sensing) |
| Network Interface – Wireless LAN |
| Standard |
IEEE 802.11a/b/g |
| Security |
WEP/WPA/WPA2/802.11i |
| Frequency |
2.4/5 GHz |
| Data Rate |
Up to 54 Mbps with automatic rate fallback |
| Modulation |
DBPSK (1 Mbps), DQPSK (2 Mbps), CCK (11, 5.5 Mbps), BPSK (6, 9 Mbps),
QPSK (12,18 Mbps), 16-QAM (24, 36 Mbps), 64-QAM (48, 54 Mbps) |
| Typical Transmit Power |
18 dBm at 1 Mbps (802.11b)
12 dBm at 54 Mbps (802.11g) |
| Receive Sensitivity |
−72 dBm at 54 Mbps (802.11a/g) |
| Connectors |
2x U.FL |
| Environmental |
| Operating Temperature |
−40 °C to 85 °C (−40 °F to 185 °F) |
| Storage Temperature |
−40 °C to 85 °C (−40 °F to 185 °F) |
| Relative Humidity |
5% to 95% (non-condensing) |
| Power Requirements (3.3V) |
| Maximum |
554 mA (1.83 W) |
| Typical |
443 mA (1.46 W);
UART B/D and Ethernet on |
| Idle |
208 mA (686 mW);
/16 clock scaling, Ethernet on |
| Sleep |
46 mA (151 mW);
EIRQ wake-up, Ethernet PHY off |
| Regulatory Approvals |
| FCC Part 15 Class B, EN 55022 Class B |
• |
| EN 61000-3-2 and EN 61000-3-3 |
• |
| ICES-003 Class B, VCCI Class II, AS 3548 |
• |
| FCC Part 15 Sub C Section 15.247 |
• |
| IC RSS-210 Issue 5 Section 6.2.2(o) |
• |
| EN 300 328, EN 301 489-17 |
• |
| UL 60950-1, EN 60950 (EU) |
• |
| CSA C22.2, No. 60950 |
• |
| EN 55024 |
• |
| Japan |
Regulatory approvals pending |
| Warranty |
| Product Warranty |
3-year |